Gears

CARTER SY 150 - 680

Synthetic lubricant for enclosed gears (polyglycol) operating under the most severe conditions (high loads, shocks, extreme temperatures and corrosive atmospheres) with reinforced extreme pressure properties. Very good thermal stability, anticorrosion protection and foaming behavior.

DIN 51517-3 CLP ,NF-ISO 6743-6 CKS /CKT ,DAVID BROWN, CMD

CARTER SH 150 - 1000

Synthetic oil (PAO) for enclosed industrial gears to provide optimum gear protection against micopitting and bearing protection against scuffing under very severe conditions. Specially recommended for gears subjected to very high loads and high temperatures in difficult environments and gears for wind power engines. Offers excellent protection against corrosion, wear and micropitting and extended oil service life due to its thermal stability. Can operate outdoors thanks to a very low pour point.

DIN 51517-3 CLP , NF-ISO 6743-6 CKD, AISI 224, CINCINNATI MILACRON, DAVID BROWN, FLENDER, USINOR FT 161, MÜLLER WEINGARTEN, AGMA 9005 - E02

CARTER XEP 150 - 680

High performance lubricant for enclosed gears, under high loads, high temperatures and difficult environments. The severest technical specifications were taken into account during the development of this product especially regarding micropitting protection and anticorrosion properties. Strengthened foaming protection. Good demulsification behavior.

DIN 51517-3 CLP, ISO 12925 CKD, AGMA 9005 - D94, US STEEL 224, DAVID BROWN

CARTER EP 68-1000

Mineral oils for enclosed gears, couplings and bearings under high loads and high temperatures. Excellent extreme-pressure and anti-wear properties. Very good resistance to oil oxidation and degradation.

DIN 51517-3 CLP , ISO 12925-1 CKD, AGMA 9005 - D94 EP, CINCINNATI MILACRON, DAVID BROWN, AISI 224, SEB 181226, FLENDER

CARTER BIO 150 - 460

New generation high performance biodegradable lubricant developed for industrial gears and bearing lubrication, to replace mineral gear oils for gearboxes operating in environmentally sensitive areas. Very good extreme pressure properties and a high scuffing load capacity ensuring good protection of gears operating under high load.

can be used when CKC/CKD (ISO 12925-1) or CLP (DIN 51517-3) mineral lubricants performance levels are requested

NEVASTANE SL 32 - 100

Synthetic (PAO) gear oils, suitable for incidental food contact, for the lubrication of gear reducers, plains and roller bearings with high loads in the food processing industries. Also suitable for the lubrication of numerous applications in the food industry such as chains and conveyor belts. Its formulation, 100% synthetic, based on PAO, provides superior protection and longer service life to the lubricated equipment.

NSF H1, Kosher, ISO 21469, ISO 6743-4 CKC

NEVASTANE EP 100 - 1000

Mineral gear oils, suitable for incidental food contact, for the lubrication of gear reducers, plain and roller bearings with high loads in the food processing industries. Also suitable for the lubrication of numerous applications in the food industry such as chains and conveyor belts. Its formulation is based on white mineral oil and high performance additives provides excellent extreme-pressure, anti-wear and anti-oxidant properties.

NSF H1, Kosher, ISO 21469, ISO 6743-4 CKC

X

By continuing browsing this website, you accept the use of cookies or other tracers for statistics of visits to optimize the functionality of the site. For more information and for tracers settings.   Cookie information for local affiliation: DK - SE - NO - FI